So I know I went quiet again for a week or so and there has been good reason, a really big wooden crate arrived with the newest addition to the studio, along with a new desk to sit it on. A jewellers workbench has also arrived and found its way into the studio for my partners hobby.
Anyway back to my big box! I have been trying to talk myself into this purchase for over a year now, so it was a bit of a releif to have finally got it done have it arrive. So what’s in the box?! I hear you cry!
Well it’s a 40watt Laser Engraving machine. I know many call them cutters but I suppose at this power level they are really more at the engraving end of the spectrum rather than the cutting end, although I have already done a couple of test cuts and it does cut too, although I am yet to test up to what thickness.
So why is I suppose the next question and to be honest I have been wanting one for around 2 years since doing a laser cutting course at my local contemporary arts centre.
I have so many ideas for things I want to do with it but for the time being I have been mostly just playing around, getting to know the machine and the software, hence I haven’t been around much for building and posting since it arrived.
I have also been trying to design a range of parts I want to make using the laser for making life in the studio easier so I have been hitting the CAD package to iron out my designs.
Finally I have an idea for display bases for some of my builds so keep your eyes open for them making sneaky appearances on the blog although it won’t be for a wee while yet as I am still working on the artwork.
So I will leave you for now with a photo of the prototype of the best in class awards I am making for this years show the model club I am a member of is putting on. Let me know what you think!
Sometimes kit’s just do not want to be built, at least that’s the feeling I am starting to get with this SR-71. After slipping with the scribe on my first attempt at reinstating the detail I lost during sanding, I had to fix the damage. So I filled and sanded the area a couple of nights ago and yesterday went to re-scribe the lines again.
I know it’s been a while since I was building regularly but I really should have avoided the schoolboy errors that were to befall me, how I did not see this coming I don’t know.
This is where the problems started. Error number 1: I had forgotten to de-tac the Dymo tape I use as a guide when scribing!
So my process when scribing is usually to use the edge of Dymo embossed label tape as a guide for the scribe line. I usually lay the tape and just do a really light line first, peel part of the Dymo tape back to check the line is positioned correctly and then lay the tape back down and go over the line a couple of times. I only peel part of the tape back so that I can lay it back down in exactly the same position.
Unfortunately what happened was I tried to peel the tape back to check the initial light scribe and because it hadn’t been de-tac’d it managed to pull a part of the primer and filler I had previously applied to the panel right off with the part of the tape I lifted.
What I should of done then is lay the tape back down to continue with the scribing then worry about fixing the panel after this was done… but again I didn’t do that!
Instead of doing that though error number 2 came along as panic and frustration set in and I took off the Dymo tape and out came the sanding sticks, fillers etc as I proceed to fix the panel.
What this then meant was today I had to try and re align the new piece of nicely de-tac’d Dymo tape to the line I had previously scribed which I could now barely see due to the remedial work. True to form I got the alignment wrong as you can see in the picture below and made a mess of the panel line for the 2nd time!
So the filler and sanding sticks are going to need to come out again, unfortunately a little of the previous fill has also chipped away during the failed scribe due to the 2 attempts not quite lining up so that will need tidied up too.
For now though I think it’s time to take a breather and break out the Airfix Hawk as I don’t want frustration to set in. Oh and if your wondering why the canopy frames look so poorly fitted its because they haven’t actually been worked on yet. I just clipped them off the sprue and blu-tac’d them in place to protect the cockpit interior during prime and paint.
Now I am moving things back into my studio I can start working on all those projects that stalled during the home renovations again. Whilst I still haven’t actually bought my new work benches / desks yet I have moved my old bench back in the mean time so I have somewhere to work at.
One of the long stalled projects is the BAe Hawk 100 I started working on almost exactly a year ago now. I didn’t really get that much done before work started at home so I was glad to see this one return to the bench as it is a kit I was really looking forward to building.
Well the box was promptly deposited on the bench and I started pulling parts and sprues out and examining them when I came across the parts for the NeOmega Resin cockpit I had begun dry fitting the last time the kit was on the bench. I eagerly whipped out the detail brushes and some paints and set to work on the bang seats first of all.
My Google skills must have suffered during my time away, given the popularity of this aircraft across the world for some reason I was actually struggling to find reference photos to work from to begin with, so I started using some of the kits standard colour call outs mixed in with some, as I later found out, not so accurate guess work.
Regardless I ploughed on occasionally heading back to Google and occasionally finding something like a half decent reference photo. This means that there is some correction work to do with regards to the colours used but, for the most part it was nice just to be able to get some paint down and detail picked out.
The Instrumentation panels were next and to be honest I did struggle a little with this. I know its just a matter of being out of practice though so I wasn’t too disheartened at my initial attempts. I may well go back and re-paint them though. Dry brushing and picking out detail I find is something I need to do regular to be able to achieve the result I want so I don’t mind the prospect of it taking me a couple of attempts to get it looking the way I would like.
Moving on from the instrument panels I decided to have a look at the tub and control sticks, again I found myself not entirely enamoured with my results but I was starting to find things a little more familiar by this time and I think I made a better job of this than the panels.
It all still needs tidying up, some parts still need repainted and then I can get a nice wash down to try and tone down some of the colours and give the base grey more of a used look and tie it all together which will no doubt help a fair bit.
None the less I decided to throw it all together in another dry fit just to see how everything looked with this initial attempt at paint and see how much of the errors in my first attempt at painting could actually be seen.
Well, as is usual when your not looking at things in isolation, it started to look better and other than some tidying up and the colour corrections I think I may get away without having to repaint everything if I want to.
Regardless of end result it was good to get my hand back in and I was also quite pleased that I hadn’t become disheartened after assessing the initial attempt. It’s important to remember when detail painting like this that it is just paint and paint can easily be stripped for another attempt or even just painted over.
Anyway I will leave you with one final photo of the parts dry fitted you will see in this one there is a join seam on the rear cowling that will need a little work once everything is glued in place, I am off to practice my Google as well as my detail painting some more.
I know I don’t usually make posts like this but I thought I would share the above video from one of my favourite model related Youtube channels with you. The channel is ScaleModelAircraft and if you like building things with wings I would highly recommend checking Dusan’s work out and giving him a Sub if your a regular Youtube user.
This kit is one I have been looking forward to since it was announced and Dusan’s build has really got me eagerly anticipating it’s release. As you will see from the video the kit has adjustable swing wings, bomb bays that can be built open or closed, paint masks for the canopy and Cartograf decal sheet covering 3 airframes.
It’s my understanding that this kit will also be re-boxed by Doyusha in Japan and have a different decal sheet included in their boxing. I am really looking forward to being able to pick up both boxing’s as it looks like a kit worthy of multiple builds.
So are there any kits you are looking forward to over the next 12 months? I love it when something gets announced that really peaks my interest. Makes me feel like a kid waiting for that birthday present you have been nagging your parents to buy since the day after your last birthday!
Ok so a pair of tweezers is a pair of tweezers right? Well not always, as modellers we often find the need to use them during our projects such as for manoeuvring small parts like PE about or placing/removing paint masks and often we accumulate several pairs often each with a different purpose in mind, for example I prefer reverse grip for PE work and soldering or small flat tips for decal work for example.
So it was a couple of weeks ago now but I recently added a new set to my armoury. It was during a visit to a new bricks and mortar model shop called Rif-Raf Models in Dundee, which is where I live. In fact this new shop has been set up by a member of the club I am also member of (IPMS Dundee) and if that’s not good enough well it’s about 500 mtrs from my home!
So I had popped in as I was on the hunt for some RAF Hemp coloured paint for a build I have coming up soon and I spied these sitting in one of the cabinets. Well I looked at the little red box and thought, I don’t really have any really pointed tweezers so they got bought too.
Now I know the packaging isn’t what’s important but it I do have to give a shout out to the quality of the packing materials, the outer card is of good thickness and quality, is well printed and the foam insert inside is suitably dense and holds the super shiny tweezers very snug.
Now as you can see the packaging above warns that these tweezers are very sharp, how sharp you ask, well certainly sharp enough to draw blood if your not paying attention as I have already found out in the few small bench sessions I have had since their purchase.
There’s a small silicone tip cover which is to help protect the tweezers from accidental damage when not in use I assume, but I would probably recommend keeping the box and storing them in it after all these are not a cheap set of tweezers and it would be a crying shame to damage the tips in storage. The tip protector does do a great job of preventing you from stabbing yourself on the extremely pointy end of these tweezers.
The tips themselves are super sharp, precision ground and line up perfectly with one another, of course this is to be expected however it never ceases to amaze me how poorly this can be done on cheaper sets of tweezers.
You don’t need a great deal of force to operate the tweezers either, the action is satisfyingly soft in the hand yet I have always felt confident in the grip strength on the actual parts your holding themselves. The tips are also nicely tapered so you shouldn’t have any difficulty using them in confined spaces like model aircraft cockpits for example.
My only criticism of these tweezers would probably be the almost mirror finish to the steel, whilst this is definitely aesthetically pleasing and not posing an issue if you’re wearing Latex or Nitrile gloves whilst you build as I normally do, I did find it quite slippery in my fingers without gloves, especially if I had recently taken my gloves off and my hands were a bit sweaty.
In conclusion I think the Meng DSPIAE Precision Pointed Tweezers are a high quality piece of kit that I am very happy to have added to my bench. Whilst some may think they’re a bit on the pricey side, they are still probably cheaper than Tweezerman sets for example which are probably more at home plucking eyebrows than poking about model kits, so you really shouldn’t be put off by the price, especially as if you look after those tips I can see them continuing to serve for years to come.