Time for another quick update on the Vampire, the main colour is going on nicely, for this I am using a mix of Vallejo Green Black with a couple of extra drops of black to darken a little more. Its going on quite nice so another light coat or two and I should be done and ready to paint the red pinstripes and the tail panels.
Well its time for another little update on the Vampire, with all the main airframe construction complete and the Mr Surfacer all cured and sanded it was time to move towards paint so the model was primed with the ever faithful Tamiya Fine, although I will be trialling a new primer on my next build.
Now being relatively new to this preshading malarky it was time for another first for me, a multi-coloured preshade. On this occasion as part of the wings and tailbooms along with the drop tanks are going to be getting painted a yellow colour I have preshaded these parts in Orange, we shall see how this works out shortly as thats her masked up ready for the first coats of Mr Color Chrome Yellow.
So whilst this isnt quite a ressurection of the undead from beyond the grave I thought it about time we did some more work to the Vampire build. I had a few issues with the fit of the intakes, this seems to be a common issue for me and I am starting to wonder if it’s the way I am building the kits.
With the benefit of hindsight I don’t think I would follow the construction order given in the instructions for this if I was to build these parts again I think I would either attach the intake to one half of a wing, attach this to the fuselage then complete with the other half of the wing, or attach the intake to the fuselage first, then put the wing in place before the glue between the wing halves cures just so I can move all the parts in relation to one another to try and get the best possible fit.
However it is what it is and I have a slight step and some gaps to deal with so I go with my tried and tested method of Mr Surfacer 1000 to address this issue. Here’s some photo’s waiting for the 2nd coat of Mr Surfacer to cure after the inital coat was sanded.