Engine test


So following on from my first YouTube video showing the main instrument panel all lit up I thought that now the engine LEDs were all soldered up and the engines glued up I had better test the LED’s were still working!

As you can see they’re all running fine, the one on the bottom right is sitting a little further back in the engine that the others but I don’t think that it is worth trying to pull apart the engines now the glue is set to adjust, other than that there is still some light bleed where either I didn’t get an even coat of the metallics inside the engines or I have thinned the wall too much. What ever the cause I am hoping a couple coats of my new AK Primer with Microfillers will solve the issue.

Routing wire and fibre optics


With the cockpit all painted up It was time to route the cables and fibre optics. I know the pilots helmets not right and it will be fixed but anyway here’s a couple of pics of where I’m at. Now I’m off to get some LEDs wired up and get some tests run.