Jaguar demasked… Again!


So here’s the Jaguar after a little more work, the final coat of flat white has dried and I have peeled off the paper/maskol masking I had applied. You will notice that I have not gone for a completely opaque finish with the white. This is because the actual temporary camo that was applied to the airframes for the training ops in Norway was extremely uneven and was more like a white wash that was put on over the top of the standard Green/Grey and all the markings etc.

Advertisements

Resurrection!


Ok as I mentioned in an earlier post I have picked up the Italeri Jaguar again in between working on the Cobra so I thought I would give a couple of quick shots of where I have got to with it. I lost a couple of antenna and once I had put the Dark Gull Grey down it became I had lost a few panel lines so I have given one or two a rescribe.

I will go back at her later with the Dark Gull Grey to cover the panel lines and then get busy with the masking for the green.

Build Complete!


Well I am calling it done, there’s one or two things I would like
to have changed, for example I kind of wish I had modeled her in flight,
I have decided against weathering it as granted there’s not a vast
amount of images of them in this scheme but those that are seem to show
some pretty pristinely kept airframes, although should could probably
benefit from a very light panel wash in the future I dont have the right
colours so no point putting a dark one on for the sake of it as it
probably wouldnt look right.

All in all for a low budget kit that has risen from the ashes of the
failed Tan models project I think that its a great little kit, sure it
has its inaccuracies but so do a lot of kits that cost a hell of a lot
more than this ones £10 price tag and it really is a fun little kit to
build, the decal sheet is extensive and is great to work with, plenty of
options to build but the instructions probably could do with improving
to say the least

Slowly slowly!


Another quick shot of the F-5A from Tiger Hobbies. Flat Black’s applied, and the pic shows her waiting for decals. I actually made a start on them last night and they’re pretty good. The wing walkway outline broke up a bit but the stencils have all been easy to work with, they’re maybe using carrier film thats a touch thick for my liking but in general they’re pretty good. So much so I might actually keep the Turkish option to use on another F-5 I have planned.

Laying Down Some Paint!


Finally starting to look like an aircraft. Got the first paint down on her last night, I have used Revell Aqua’s Aluminium for this. I was going to pick out some panels with a different shade of metallic but I’m not sure if I should bother as the blue diamonds ships always seem to be spotless in the images I have seen.

Progress on the F-5A


Just a quick update on the F-5A Tiger Hobbies kit I am working on at the moment. As you will see from the top image I had a small problem when removing the wings from the Sprue Gates.

One of the wings was fine and only had 3 or 4 gates holding it in place, however the other wing had 7 or 8 gates holding it in place and unfortunately as I was trimming them the ones on the trailing edge of the wing snapped off of their own volition and chomped the wing a little.

Thanks to a little minor surgery and some of that Deluxe Plastic Putty stuff I have got it looking half decent again. Not much left now before paint, Yay!

F-5A Update


Well I got some more time at the bench and ask you can see from the photos I have managed to decipher enough of the fag packet instructions that come with this model to get the cockpit together and the in place and assemble the main two halves of the fuselage.

I love getting this stage done on any build as next is attaching the wings etc and this is when a build really starts to take shape!

Finally Something To Post About!


So I know I have been away for a while, but this should be me back at the bench now! I have my first ever group build I committed too a few months ago now due to start this weekend on the Britmodeller forum and it’s a Single Type Group Build of my favourite airframe the Northrop F-5!

This is going to be the first of a couple of builds I intend to do for the STGB and for it I am using the Tiger Hobbies 1/48 F-5A kit, it’s not a fantastically accurate kit to be honest, but it builds into something thats kind of F-5 shaped and considering its price point I can forgive the inaccuracy.

I am going to be building this straight out of box and into the Philipene Blue Diamond Acroteam scheme shown at the top of one of the photos above. I have been looking forward to being a part of my first Group Build so I will be throwing myself into it with great eagerness!

Hurricane MKI complete!


Here are some photographs of the completed MKI Hurricane by Airfix in 1/72nd Scale. First of all I need to thank Mitch from Britmodeller for sending me a spare canopy after mine met with disaster through my own stupidity.

I think the brown colour is incorrect but I kind of like how it looked when it had dried so I left it instead of painting over. Painted using a mix of Tamiya and Revell Acrylics and Varnished with Windsor and Newton Matt on the top side of the aircraft. I hope you like it and if you have any suggestions for improvements they’ll be greatfully received.

Gnat Complete!


The 2nd Gnat is finally completed. I added the last of the details tonight so I thought I would post up a few snaps of the finished article on her own and along side her sister aircraft. If you have any comments/critique/suggestions for improvement then please do make them!