Well it certainly has been a while since I worked on a kit, and whilst not technically building I did manage to dig the Revell SR-71 from the bowels of the cupboard it’s been stored in for the last however many months it has been and look it over.
Truth be told I couldn’t really remember what I was doing with it before it got boxed away so whilst my workbench isn’t actually back in location I managed to set the spray booth up on a coffee table and get a coat of Vallejo black primer down on her to have a look see at the state of play.
So whilst the coat wasn’t the most even I have ever put down it did show up a couple of issues, a slip with the scribe became obvious as did an area near the cockpit that would need a little further attention with the filler and a sanding pad.
Whilst these aren’t too major an issue I think I may need to wait until I have my bench set up again before I tackle the issues.
Workbench should be going into place later this week, although I am also looking to increase my work area with the addition of a new bench, the better half is also going to be joining me in the studio once her jewellers work bench arrives and then I am also looking to add a laser cutter / engraver to the studio too.
Exciting times are ahead but first of all we have the largest show on my calender this year, the Scottish National Scale Model Show 2019. Whilst I don’t think I will be in much of a position to enter anything this year, truth be told I will struggle to add much to the clubs display either as many of my built models have been damaged during the home renovations.
Whilst the damage for most of the kits should be easily repairable it does give me the opportunity to cherry pick the ones I actually want to put back on display, whilst replacing those I don’t want back on display is providing a good reason to get back building regularly again.
Time for another quick update on the Vampire, the main colour is going on nicely, for this I am using a mix of Vallejo Green Black with a couple of extra drops of black to darken a little more. Its going on quite nice so another light coat or two and I should be done and ready to paint the red pinstripes and the tail panels.
Returning to the theme of quick and easy builds I decided to get another of the small Revell Star Wars kits out of the stash, this time I plugged for the iconic TIE Fighter with this kit being 1:110 scale. I have to admit I find the lack of consistency with the scales on these small Star Wars kits a tad annoying. I would much prefer if they were all done to one scale, whatever that may be, but thats just my own personal hangup and it I am sure this doesn’t bother most of the builders of these kits and I suppose this would maybe cause a few issues when it comes to displaying them alongside one another.
I did toy with the idea of lighting this one up with some LEDs/Fibre optics but looking at the internals there probably isn’t a lot a room in this one to embark on my first lighting project so I’ll leave that for another build.
So I actually finished the build a little over a week ago, I just haven’t been able to get chance to update the blog so here it is, my attempt at AZ Models 1/72 TH-1G Training Cobra. I hope you like her.
Well I am calling it done, there’s one or two things I would like
to have changed, for example I kind of wish I had modeled her in flight,
I have decided against weathering it as granted there’s not a vast
amount of images of them in this scheme but those that are seem to show
some pretty pristinely kept airframes, although should could probably
benefit from a very light panel wash in the future I dont have the right
colours so no point putting a dark one on for the sake of it as it
probably wouldnt look right.
All in all for a low budget kit that has risen from the ashes of the
failed Tan models project I think that its a great little kit, sure it
has its inaccuracies but so do a lot of kits that cost a hell of a lot
more than this ones £10 price tag and it really is a fun little kit to
build, the decal sheet is extensive and is great to work with, plenty of
options to build but the instructions probably could do with improving
to say the least
Another quick shot of the F-5A from Tiger Hobbies. Flat Black’s applied, and the pic shows her waiting for decals. I actually made a start on them last night and they’re pretty good. The wing walkway outline broke up a bit but the stencils have all been easy to work with, they’re maybe using carrier film thats a touch thick for my liking but in general they’re pretty good. So much so I might actually keep the Turkish option to use on another F-5 I have planned.
Finally starting to look like an aircraft. Got the first paint down on her last night, I have used Revell Aqua’s Aluminium for this. I was going to pick out some panels with a different shade of metallic but I’m not sure if I should bother as the blue diamonds ships always seem to be spotless in the images I have seen.
So I know I have been away for a while, but this should be me back at the bench now! I have my first ever group build I committed too a few months ago now due to start this weekend on the Britmodeller forum and it’s a Single Type Group Build of my favourite airframe the Northrop F-5!
This is going to be the first of a couple of builds I intend to do for the STGB and for it I am using the Tiger Hobbies 1/48 F-5A kit, it’s not a fantastically accurate kit to be honest, but it builds into something thats kind of F-5 shaped and considering its price point I can forgive the inaccuracy.
I am going to be building this straight out of box and into the Philipene Blue Diamond Acroteam scheme shown at the top of one of the photos above. I have been looking forward to being a part of my first Group Build so I will be throwing myself into it with great eagerness!
Here are some photographs of the completed MKI Hurricane by Airfix in 1/72nd Scale. First of all I need to thank Mitch from Britmodeller for sending me a spare canopy after mine met with disaster through my own stupidity.
I think the brown colour is incorrect but I kind of like how it looked when it had dried so I left it instead of painting over. Painted using a mix of Tamiya and Revell Acrylics and Varnished with Windsor and Newton Matt on the top side of the aircraft. I hope you like it and if you have any suggestions for improvements they’ll be greatfully received.